광섬유센서

Web site : https://www.philtec.com

Sensor Calibrations: Sensors in the field can be returned to the factory for a gap calibration in air. Sensors can also be calibrated while submerged in a fluid sample provided by the customer.

cal-A Sensor calibrations in air
cal-F Sensor calibrations in fluid
cal-AN NIST Traceable Sensor Calibrations In Air
cal-FN NIST Traceable Sensor Calibrations In Fluid
CM32940 Ø5 x 2 mm Calibration Check Mirror. A calibration check mirror is provided along with a Certificate of Calibration which specifies the accuracy of a single point sensor reading.

Compression Fittings: Stainless Steel fittings with nylon compression ferrules can be used to hold sensor tips having 1/8" or 3/16" diameter tips. Overall length is 1.4". They can be bulkhead mounted into a 0.4" deep straight threaded hole.

CF125 For 1/8" tip diameter sensors such as D63, D64, D100, RC100. Requires 5/16-24 threaded hole.
CF187 For 3/16" tip diameter sensors such as D169 – D171, RC171. Requires 3/8-24 threaded hole.
CF312 For 5/16" tip diameter sensors such as RC89, RC90, RC140, RC190. Requires 1/2-20 threaded hole.

Mirrored Target Discs: Type 316 stainless steel 0.8 mm (.032") thick with #8 mirror polish. When bonded to a target, these specimens present a smooth mirrored surface to optimize sensor performance.

M25 Ø 6.35 mm (1/4") Disc
M50 Ø12.7 mm (1/2") Disc

Retro-Reflective Tape

RT1 100 mm square. Use Retro-Reflective Tape To Enhance Sensor Performance.

Probe Mounting Blocks: Aluminum block for use with probes having a Ø 1/4" or Ø 3/16" collars. The block can be mounted on a linear stage to provide a fine active adjustment of the sensor-to-target gap.

B25 For any model with Ø1/4" collared probes. 2D Drawing
B31 For any model with Ø5/16" collared probes.

Micro-Stages: These manual linear stages provide a fine adjustment (80 TPI).

56416 Single Axis Stage, 0.18" Travel for use with Model B25 Block.
56422 Single Axis Stage, 0.50" Travel for use with Model B31 Block

mini-DMS Y-Cable Power Adaptors

PS-1 Required for operaton of any mini-DMS sensor. Includes AC/DC power supply and Y adaptor cable with D-sub female 9 pin (standard RS-232 connector) and 2.1 mm coax male power connector.

PS-10 Enables single channel operation of any rack mountable mcDMS sensor (without using the 10DMS rack). Includes AC/DC power supply and Y adaptor cable with D-sub female 9 pin (standard RS-232 connector) and 2.1 mm coax male power connector.

PS-U Universal power supply for mini-DMS sensors (power supply only).

Option Q Power Supply

PS-Q Provides a 12 VDC, 500 ma AC/DC power supply terminated with Philtec’s 3 Pin Weathertight Option Q Connector.

USB To Serial RS-232 Adaptor Cable
ADB9 A 500 Kbps High Speed Adaptor with 6 inch long cable, 9-pin Serial Male to USB Type A Male, USB 1.1 Compliant, Works with USB 1.1 & 2.0 ports. Requires Windows 98 SE, ME, 2000, XP, Vista, Windows 7

mini "B" to "A" USB Locking Connector
AUSB A 2 cm long, robust dust and waterproof connection, fully shielded providing good levels of noise immunity and EMI protection. For use with muDMS sensors.